QA Solar Cell Module Tester on slolar panel

QASolar Cell Modual Tester 1.Large power pulsed xenon lamp 2.Loaded high speed data acquisition I-V curve 3.Windows interface

Introduction

Apply to the test and result record of Mono-Si or Poly-Si solar cell pieces in Solar

The equipment is specially used in the electric performance test and on file for Mono-Si / Poly-Si /

A-Si / other types solar modules

Advantages

1.Guarantee A gradeSpectrum,A grade non-uniformity of intensity,A grade Instability of radiation.

2.Pneumatic and buffering contact, front probe contact, back face contact.

3.4-line survey; 14-bit 4channel high-speed synchronous acquisition card

4.10 parameters display; meansurement parameter displays in tabulation and graphic way

5.Irradiance automatically compensating; temperature automatically compensating

6.Voice counts off and prompts; counting prompts of flash time

7.24 hours continuous working; flash working life of imported Xenon Lamp is 300000 times.

Technical Specification:

Items	QASCMT-A	QASCMT-B
Lamp Spectrum	IEC60904-9 and JISC8933 [Class A]
Light Intensity	100mW/cm²(20~120mW/cm² continuous adjustable)
Uniformity of Irradiation	≤±2% [Class A]	≤±3%
Instability of Irradiation	≤±2% [Class A]	≤±2%
Consistency of Testing	≤±0.5%	≤±1%
Pulse Width of Single Flash	10ms
Effective Testing Area/Watts	2000mm×1100mm/2000mm×1600mm   5W~300W
Measuring Voltage	0~100V(resolution 1mV)
Measuring Current	0~20A(resolution 1mA)
Tested Electric Performances	Isc,Voc,Pmax,Vm,Im,FF,EFF,Temp,Rs,Rsh

sample

QA Solar Cell Module Tester on slolar panel